Blog

Wide portfolio of factory-backed, quality-tested parts and accessories available for the 2021 Jeep® Wrangler 4xe Industry-first Jeep Performance Parts 2-inch lift kit is specifically engineered and tuned for the new Wrangler 4xe plug-in hybrid electric vehicle application New Jeep- and Mopar-branded 240-volt at-home electric-vehicle wall chargers are available now at the Mopar Parts and Accessories eStore; charges more than five times faster than standard cordset cable With a comprehensive portfolio of Jeep® Performance Parts (JPP) and accessories, Mopar will help power the introduction of the 2021 Jeep Wrangler 4xe plug-in hybrid electric vehicle. “With an industry-first lift kit for a plug-in hybrid electric vehicle, Jeep Performance Parts from Mopar will give owners of the new 2021 Jeep Wrangler 4xe the opportunity to amplify the 4x4 capability and the fun-to-drive, open-air experience of the most capable, technically advanced, eco-friendly SUV,” said Jim Morrison, Vice President, Jeep Brand North America. “The 2021 Wrangler 4xe is Trail Rated with solid front and rear axles, a full-time 4x4 two-speed transfer case, a fully articulating suspension and 30 inches of water fording capability.” The new Jeep Wrangler 4xe delivers 21 miles of nearly silent, zero-emission, electric-only propulsion, making it commuter friendly as an all-electric daily driver without range anxiety. The hybrid powertrain combines a high-tech 2.0-liter four-cylinder turbocharged engine with two electric motors, a high-voltage battery pack and the TorqueFlite eight-speed automatic transmission. Benchmark 470 lb.-ft. of torque in the Wrangler 4xe arrives instantly on demand from the driver. The powertrain also delivers fuel-saving, seamless, start-stop operation of the engine. “We continue to expand our off-road Jeep portfolio with more innovative new features, including convenient at-home electric-vehicle chargers for vehicles like the new Jeep Wrangler 4xe,” said Mark Bosanac, North America Vice President, Mopar Service, Parts & Customer Care. “Across the entire Jeep lineup, Mopar offers more than 500 quality-tested, factory-backed parts and accessories.” Below are select JPP and Mopar offerings available for the new 2021 Jeep Wrangler 4xe (with Mopar part number and U.S. MSRP). For more information, see the complete JPP catalog at mopar.com/jpp or the Mopar Parts and Accessories eStore at store.mopar.com JPP 2-inch lift kit (77072522 | $1,495): The industry-first lift kit for a plug-in hybrid vehicle is tuned specifically for the Jeep Wrangler 4xe plug-in hybrid vehicle application. The kit includes four springs, four FOX shocks, front lower control arms, front and rear stabilizer links, front and rear bump stops, various fasteners and the JPP badge, all packaged in a custom, reusable wooden crate complete with the JPP logo. 240-volt, at-home, electric vehicle wall chargers: The 240-volt wall chargers are available with branding from Mopar or Jeep in hardwired (HCS40 | $621.50) or plug-in (HCS40P | $647.90) versions for at-home use. Customers can enjoy a charging time that is more than five times faster for their iconic off-roader versus the standard cordset cable. Both wall chargers are available at the Mopar eStore. JPP rock rails (82215165AB | $925): For the serious off-roader, JPP rock rails provide added lower-body protection to the vehicle. Rails are roll-formed and constructed from zinc-coated steel for superior corrosion resistance. The outer surface is e-coated and then DuraBull®-coated (truck bedliner coating) to provide superior protection. JPP tube doors (77072498AC | $1,195): Constructed of 2-inch round, heavy-gauge steel tubes, JPP tube doors create more open-air freedom. Production hinges and rubber bump stops are used for added strength and factory fit and finish, while preventing shakes and rattles. JPP mirror kit for tube doors (77072562AA | $215): For added functionality of the JPP tube doors, the mirror kit includes two side mirrors that provide an improved range of vision during open-air adventures. Available beginning in early May. JPP half doors (part of Dual-Door Group – sales code AJB for two-door | $2,350; AJB for four-door | $3,995; AJS for two-door | $2,550; AJS for four-door | $4,395): Ordered as an option during a new-vehicle purchase, the Mopar Custom Shop offers the Dual-Door Group that includes both full and half doors. New half-door option enhances the Jeep Wrangler driving experience with production styling, security and occupant protection. With lower window ledges, visibility is improved while maneuvering on and off road. New upper-window assemblies – available in base vinyl (AJB) or premium acrylic (AJS) – create a weather-tight seal and feature zippered plastic windows for quick, easy removal. Available in late summer. JPP front bumper (82215691AD | $1,275): Rigorously tested for performance, durability and corrosion, this heavy-duty front bumper is steel e-coated and black-powder coated. D-rings are included for extra towing capability. The bumper is fully compatible with the Jeep Performance Parts Rubicon Warn winch. JPP Rubicon Warn winch (P5160095AC | $1,595): Completely waterproof and submersible to ensure reliable operation during water fording and other adverse conditions, the Rubicon Warn winch includes 100 feet of Warn Spydura™ Synthetic Rope and is finished in three-stage zinc phosphate, e-coat and powder coating. JPP winch mounting kit (82215182AC | $450): Designed to fit on the Rubicon steel front bumper and the JPP front-bumper assembly, the mounting kit ensures proper alignment with the vehicle's airbag deployment strategy. JPP grille and winch guard hoop (82215351 | $249): The grille and winch guard hoop is constructed from 2-inch black powder-coated steel and bolts to the Rubicon steel front bumper or JPP steel front bumper. JPP 7-inch off-road LED light kit (82215386AB | $725): Emitting 8,000 lumens each, a pair of 7-inch off-road LED lights provides superior performance without shadows and gives increased visibility for a more illuminating off-road driving experience. JPP swing gate hinge reinforcement (82215356AB | $625): On the rear of the vehicle, the JPP swing gate hinge reinforcement allows for a larger spare tire to be mounted on the swing gate. The reinforcement is powder-coated black and works with the production hinge for easy installation. JPP oversized spare-tire carrier modification kit (82215355 | $275): On the rear of the vehicle, the kit provides various spacers to adjust the production spare-tire carrier in order to accommodate the larger wheel/tire assembly. The carrier is painted with a corrosion-resistant black finish. JPP Center High-Mount Stop Light (CHMSL) relocation kit (82215349AB | $85): The CHMSL relocation kit allows customers to add larger tires on the spare-tire mount on the rear of the vehicle and move the CHMSL to the center of the spare tire. All-weather floor mats (82215986 | $165): All-weather floor mats feature high-wall, bucket-style construction in order to provide maximum coverage and protect floor areas from wetness, snow, mud, dirt and grime. The black, four-mat set includes a terrain-style surface design and red Jeep logo on the front mats. Molded cargo tray kit (82215988 | $129): The molded cargo tray kit provides full coverage of cargo area and seat backs. The kit includes a cargo tray for the floor and two seat-back cover pieces (60/40 seat style). The cargo tray is black and features a red Jeep logo. Jeep Performance Parts Created in 2012 and offered by Mopar for the Jeep brand, Jeep Performance Parts (JPP) provide off-road enthusiasts with high-end, hard-core quality aftermarket accessories and performance parts. The portfolio of factory-backed, quality-tested parts includes axles, lift kits, bumpers, winches, skid plates, suspension components and more. The products are created in close conjunction with the Jeep brand, engineering and product design-office teams for development, testing and validation. Strict standards and factory-exclusive data — information not available to the aftermarket — are used to seamlessly integrate performance parts and accessories in order to deliver proper fit, finish and quality right down to the color, grain and appearance of each product. To see the full line of Jeep Performance Parts, visit mopar.com/jpp Source Article: https://media.stellantisnorthamerica.com/newsrelease.do?id=22667&mid=1

FCA’s Toledo Assembly Complex this week launched production of the innovative 2021 Jeep® Wrangler 4xe plug-in hybrid. The most technologically advanced Wrangler ever delivers zero-emission open air driving on- and off-road, with up to 25 miles of electric-only range and nearly 400 miles of total range. Assembly of the Wrangler 4xe, including its 17 kilowatt-hour battery pack and 375-horsepower, 470 lb.-ft. of torque electrified powertrain with two electric motors, is integrated into the existing Wrangler assembly line and built on two shifts by more than 3,200 UAW-represented employees at the Toledo North plant in Ohio. Source Article: https://media.fcanorthamerica.com/mediacenter.do?method=viewChannel&cid=c43d14882

New 2021 Jeep® Gladiator Willys debuts featuring a limited-slip rear differential, rock rails, aggressive 32-inch mud terrain tires and a rugged look with black accents Gladiator Willys available on Sport and Sport S model Jeep Gladiator Willys available now The Jeep® brand is introducing a new edition of the 2021 Jeep Gladiator in the form of the Willys models, delivering a new level of personalized content for a distinct appearance that is combined with legendary Jeep 4×4 capability. “Building on the widely popular Wrangler Willys, we’re thrilled to announce the Willys model is joining the Gladiator lineup as another way for Jeep to connect with our customers,” said Jim Morrison, Head of Jeep Brand – North America. “Gladiator Willys models harken back to the original Jeep lineup while offering an aggressive look and additional increased capability.” Jeep Gladiator Willys models are available for ordering and in Jeep showrooms now. Jeep Gladiator Willys The 2021 Jeep Gladiator lineup is bolstered by the addition of the Willys edition and marks the first time it is available on Gladiator. The Gladiator Willys edition features a limited-slip rear differential, Rubicon cab rock rails and shocks, and 32-inch BFGoodrich KM2 mud terrain tires. These features, combined with Jeep’s Command-Trac 4×4 part-time, two-speed transfer case with a 2.72:1 low-range gear ratio, bolster the Gladiator Willys’ off-road capability. This added capability is highlighted by a rugged appearance. Special exterior design cues feature a Willys hood decal, heritage 4WD tailgate decal, unique black 17-inch aluminum wheels with gray pad print and a gloss black sport grille. All-weather slush mats are also standard. The Sport S based Gladiator Willys also includes standard Technology Group with 7-inch radio with connective services and Convenience Group. The 2021 Jeep Gladiator, engineered from the ground up to be the most off-road capable Jeep truck ever, builds on a rich heritage of tough, dependable Jeep trucks with an unmatched combination of rugged utility, authentic Jeep design, open-air freedom, clever functionality and versatility. Equipped with the proven 3.6-liter Pentastar V-6 engine and a versatile cargo box, Gladiator is built to handle the demands of an active lifestyle while delivering an open-air driving experience in a design that is unmistakably Jeep. Combining traditional Jeep attributes with strong truck credentials, the Jeep Gladiator is a unique vehicle capable of taking passengers and cargo anywhere. All Gladiator models are Trail Rated with a badge indicating that the vehicle is designed to perform in a variety of challenging off-road conditions identified by five key consumer-oriented performance categories: traction, ground clearance, maneuverability, articulation and water fording. The Gladiator Willys edition is available in eight colors: Black, Granite Crystal, Sting Gray, Billet, Firecracker Red, White, Hydro Blue and Snazzberry. The 2021 Jeep Gladiator Willys has a starting MSRP of $35,265 (plus $1,495 destination) and is available now. Source Article: https://media.fcanorthamerica.com/newsrelease.do?id=22278&mid=

New 2021 Jeep® Cherokee Latitude LUX delivers a long list of premium amenities, standard safety features and legendary Jeep 4x4 capability for an incredible value Cherokee Latitude LUX models now available for sale and order through local Jeep dealers The Jeep® brand is introducing the new 2021 Cherokee Latitude LUX model to deliver consumers a new level of comfort, luxury and safety, combined with unmatched capability in the midsize SUV segment. "The new 2021 Cherokee Latitude LUX truly enhances the Jeep lineup and is a direct reflection of what our customers want and value the most in their vehicle - everyday practicality, exceptional comfort, with outstanding ride and handling characteristics," said Jim Morrison, Head of Jeep Brand - FCA North America. "As the most capable midsize sport-utility vehicle, the Jeep Cherokee continues to offer consumers the ultimate blend of all-weather 4x4 capability and even more standard amenities at an incredible value." The new Cherokee Latitude LUX joins Latitude, Latitude Plus, Limited and Trailhawk models in the Cherokee lineup. With a U.S. Manufacturer's Suggested Retail Price (MSRP) of $30,145 for 4x2 models and $31,645 for 4x4 models (plus $1,495 destination), Cherokee Latitude LUX models are currently available for sale and order through local Jeep dealers. The Jeep Cherokee Latitude LUX includes a host of standard premium amenities, including Nappa leather seats, power front seats with power lumbar adjuster, heated front seats, premium-wrapped heated steering wheel, remote start, windshield wiper deicer, and the latest Uconnect system with standard Apple CarPlay and Android Auto. Available features include dual-pane panoramic sunroof, premium nine-speaker Alpine sound system and 8.4-inch touchscreen radio. Standard safety and security features on Jeep Cherokee Latitude LUX models include: Full-speed Forward Collision Warning with Active Braking Suite of premium LED lighting, including headlamps, taillamps and fog lamps Blind-spot Monitoring Rear Cross Path detection LaneSense Lane Departure Warning with Lane Keep Assist ParkView rear backup camera and park assist with dynamic grid lines Rain-sensing wipers The Cherokee Latitude LUX comes standard with the 3.2-liter Pentastar V-6 engine with engine stop-start technology and high-efficient nine-speed automatic transmission. As the only V-6 engine in its class, the Cherokee Latitude LUX delivers 29 mpg highway and best-in-class towing capability (up to 4,500 pounds). The 2.0-liter I-4 turbocharged engine, one of the most technologically advanced engines in the automotive industry, is optional. For unmatched 4x4 capability in all weather conditions, the Latitude LUX comes standard with the Jeep brand's renowned Selec-Terrain traction control system, which allows the driver to choose between five modes for optimal on- and off-road performance. Jeep Cherokee maintains its benchmark position by featuring rear-axle disconnect technology that results in reduced energy loss when 4x4 capability isn't needed, while improving fuel efficiency. The rear-axle disconnect seamlessly switches between two- and four-wheel drive for full-time torque management and does not require input from the driver. Optional features on the 2021 Cherokee Latitude LUX model include: Comfort and Convenience Group, which includes security alarm, power liftgate, auto-dimming rearview mirror, air conditioning with dual-zone automatic temperature control, universal garage door opener, 115-volt power outlet, 8.4-in. touchscreen radio and 7-in. full-color thin-film transistor display Sun and Sound Group, which includes dual-pane panoramic sunroof and premium Alpine nine-speaker sound system with subwoofer Trailer Tow Group, which includes heavy-duty engine cooling, transmission auxiliary oil cooler, Class III hitch receiver, four- and seven-pin trailer-tow wiring harness and full-size spare tire (4x4 models only) Source Article: https://media.fcanorthamerica.com/newsrelease.do?id=22216&mid=4